PIPE AND CABLE LAYING SYSTEMS

Pipe And Cable Laying Systems

The TIE Services International self-contained electro-hydraulic 2 track tensioner is designed to operate in an open deck working environment. The tensioner is completely self-contained, on a common skid, and requires only an electrical power supply to the tensioner and optional remote control cabin. A single Ethernet cable, 20 metres, provides the necessary control signals between the tensioner and remote console. The self-contained unit can be easily mobilised and transported by road.

Tensioner controls and instrumentation is provided via stay put rotary controllers, illumined push buttons and a 9” HMI screen with a comprehensive alarms and monitoring system.

Tensioners available in the following range 5, 10, 15 and 20Te

5Te Datasheet

Maximum Tension (Bi-directional) Manually varied in the range 0 - 5 Te
Linear Speed Variable in the range 0 - 1200 m/hr, 20 m/min
Squeeze Tension Variable in the range 0.5 - 25 Te
Static Parking Brake (1.8 x SWL minimum) Fail safe, maximum holding tension 9 Te
Hydraulic Drives 2 off fail safe braked hydraulic geared motors
Track configuration Dual track, vertically aligned, 600mm stroke
Track contract length and guide opening Track length 2.5m. Symmetrical guide opening.
Track Pad Type V-grooved rubber bonded pads (bolted)
Min product friction at SWL µ = 0.2
Product diameter (standard pad) 50mm to 450mm
Controls Local and Optional Remote (within control cabin)
Supply Required 3 ph 380/480 V - 50/60 Hz (dual supply)
Tension and Squeeze Measurement X 4 Load pins interfaced with Siwarex weighing modules
Integral HPU - provided to provide track squeeze, track open and close and track brake functions. 2 x 55Kw, variable flowrate 15 - 170lpm max 230 Bar 600 litres Air blast cooling
IP Rating Tensioner IP65, Control Cabin IP55
Tensioner Weight (without cable) 11000Kg
Tensioner (L x W x H) millimetres 4100 x 2400 x 2950
Control Cabin Weight (without cable) 2580Kg
Control Cabin (L x W x H) millimetres 1500 x 1500 x 2000

10Te Datasheet

Maximum Tension (Bi-directional) Manually varied in the range 0 - 10 Te
Linear Speed Variable in the range 0 - 1200 m/hr, 20 m/min
Squeeze Tension Variable in the range 0.5 - 25 Te
Static Parking Brake (1.8 x SWL minimum) Fail safe, maximum holding tension 18 Te
Hydraulic Drives 2 off fail safe braked hydraulic geared motors
Track configuration Dual track, vertically aligned, 600mm stroke
Track contract length and guide opening Track length 2.5m. Symmetrical guide opening.
Track Pad Type V-grooved rubber bonded pads (bolted)
Min product friction at SWL µ = 0.2
Product diameter (standard pad) 50mm to 450mm
Controls Local and Optional Remote (within control cabin)
Supply Required 3 ph 380/480 V - 50/60 Hz (dual supply)
Tension and Squeeze Measurement X 4 Load pins interfaced with Siwarex weighing modules
Integral HPU - provided to provide track squeeze, track open and close and track brake functions. 2 x 55Kw, variable flowrate 15 - 170lpm max 230 Bar 600 litres Air blast cooling
IP Rating Tensioner IP65, Control Cabin IP55
Tensioner Weight (without cable) 17500Kg
Tensioner (L x W x H) millimetres 5900 x 2400 x 2950
Control Cabin Weight (without cable) 2580Kg
Control Cabin (L x W x H) millimetres 1500 x 1500 x 2000